PP3 FIREPLUS
THE ULTIMATE FIRE-RESISTANT WASTE SYSTEM
DOCUMENTS AND RESOURCES
PP3 Fireplus | L02-175/3 |
PP3 FIREPLUS | T02-456 |
PP3 Fireplus is a system made up of pipes and fittings for the construction of waste and rainwater drainage systems. The simple installation is intuitive and quick thanks to the push-fit socket.
PP3 Fireplus was created specifically to provide excellent fire resistance: it has obtained the B s1 d0 classification defined by the European standard EN 13501, which identifies the highest standard of resistance in case of fire.
Thanks to the triple-layer structure in polypropylene enriched with mineral fillers, the acoustic performance of the system is also excellent, with a noise level of less than 10 dB(A) measured at a flow rate of 2 l/s.
PP3 Fireplus is ideal for all low- and high-temperature waste systems, ventilation systems and rainwater drainage systems within residential, civil and industrial buildings.
ADVANTAGES
OF THE PP3 FIREPLUS SYSTEM

FIRE RESISTANCE
The system has achieved B s1 d0 classification according to EN 13501 on the behaviour of building materials in the event of fire.

QUICK AND EASY INSTALLATION
Thanks to the push-fit connection, there is no need for adhesives or solvents.

SIMPLIFIED INSPECTIONS
The white and extremely smooth inner layer facilitates video inspection operations.

ACOUSTIC COMFORT
Noise levels of 15 dB(A) at 4 l/s and lower than 10 dB(A) at 2 l/s according to EN 14366.

RESISTANCE TO PRESSURE
The system can withstand negative pressures down to -800 mbar and positive pressures up to 1.5 bar.

CHEMICAL RESISTANCE
High resistance to substances dissolved in civil and industrial waste water.

WIDE RANGE
Pipes and fittings are available from Ø 40 mm to Ø 250 mm, for every design and installation requirement.

GUARANTEED COMPATIBILITY
PP3 Fireplus is compatible with all other Valsir waste systems and can be interconnected with the most commonly used materials - such as cast iron, PE, PVC and PP - thanks to special fittings.