Inlet valve
It is made entirely of technopolymer and pre-fitted in the cisterns to make installation easier and faster; the system also incorporates an accessible closing device to always guarantee perfect performance.
Not registered?
If you have not yet registered on the Valsir web site fill in the form with your details and obtain free access to the download area where you will be free to download our price lists and technical brochures. You will also have the possibility of receiving our periodic newsletter: the best way to remain up-to-date on all the latest developments in Valsir.
It is made entirely of technopolymer and pre-fitted in the cisterns to make installation easier and faster; the system also incorporates an accessible closing device to always guarantee perfect performance.
The brass closing device is optimized to ensure the correct functioning over time.
Body made of polymer with mechanical properties comparable to those of brass.
Can be fully inspected even after installation thanks to the verifiable brass closing device.
The brass swivel fitting has been studied to greatly simplify the installation phase.
Fully pre-assembled and ready to install
Designed and produced to guarantee maximum reliability in all situations, it resists water hammer as great as 30 bar. The internal accessible filter and the absence of a hose allow an easy maintenance and guarantee an excellent level of silence. It is certified in accordance with EN 14124.
Produced entirely with materials that prevent the formation of limescale.
Internal filter must be inspectionable to block the impurities present in the water that can damage the membranes of the float valve.
Every part can be completely disassembled and reassembled to allow cleaning.
Direct connection, without a flexible hose, between the stop valve and the float valve which reduces noise and allows fast maintenance.
Designed to provide resistance to extremely high pressures and water hammers.
The resistance to limescale of its components, the self-regulation to the WC pans present on the market, and the blends of the seals that resist to the corrosion effect over the years, make it the most reliable valve on the market.
Unrivaled high pan cleaning performances thanks to the innovative outlet valve.
Made entirely with materials that prevent the formation of limescale and guarantee the reliability of the valve even in extreme conditions.
The rubber components are in compliance with EN681/WC, a guarantee of their unmatchable quality and resistance.
Discharges can be regulated from 6/3 to 4.5/3 or 4/2 liters in order to minimize the water consumption and to respect the environment and the Green Building principles.
The device guarantees the perfect position and protection of the internal components during handling of the cistern until the control plate is installed.
Blocks all the inside components of the flushing cistern.
The device must be extracted in order to install the flushing cistern correctly, it does not allow the push plate to be placed until it is not removed.
Technological innovation, attention to details and constant quality control, together with the desire to provide our clients with reliability and safety.
These are the cornerstones that have always driven the design and production of Valsir cisterns over the years.
Tropea S represents an absolute novelty on the international scene, a state-of-the-art and innovative product: the first cistern in the world designed
to reduce the noise generated during use.
The experience gained by Valsir in the Triplus®, Silere® and PP3 soundproof waste systems allowed us to reach levels of excellence also in our flush systems. To the numerous advantages of Tropea S we also added silence.
Tropea S is in fact the first cistern in the world made of a soundproofing plastic material.
Inside the Valsir Research and Development laboratories a special plastic compound was designed using a formula (exclusive to Valsir) with the aim of reducing the noise emissions from the flush cistern.
Laboratory tests show that the perceived noise from Tropea S is 5 times lower as compared to the most widely-used cisterns on the market.
The internal components of Tropea S have been certified in the prestigious Fraunhofer Institute of Stuttgart, in compliance with ISO EN 3822 Class I.
Tropea S is the only in-wall cistern on the market with a float valve and a stop valve certified at the top of the category in terms of reduced noise emissions.
Not only high mechanical performance but also excellent acoustic performance.
The material of the container is designed to ensure high absorption of acoustic vibrations.
The different plastic materials of the flush and float valve avoid the formation of limescale.
The cistern is supplied 100% pre-assembled to improve installation speed and simplicity on the site.
Extreme versatility of activation type: mechanical, pneumatic, electronic, electronic and mechanical, or mechanical and pneumatic.
The rotating water connection fitting simplifies cistern installation.
All rubber components comply with EN 681/WC, a guarantee of their unmatched quality and resistance to chemical agents.
Patented by Valsir, the flush valve guarantees the cleaning of all pan types, including Rimless pans.
The internal components of Tropea S are certified according to ISO EN 3822, in silence class I both at 3 and 5 bar.
With Tropea S, flush adjustment is incredibly easy and can be set at 6/3, 4.5/3 or 4/2 litres to ensure the preservation of environmental resources in full compliance with Green Building principles. That is why Tropea S is one of the most efficient flush cisterns on the market!
It has received two important certificates for its high level of water-saving efficiency: the
The EPD statement is also available to certify the reduced environmental impact associated with TROPEAS BLOCK according to the full life cycle assessment, or "cradle to grave". This means that our monitoring and optimisation efforts do not only cover the production stages: TROPEAS BLOCK is a champion of sustainability from the extraction of its raw materials to the disposal of the product itself. Choose it for your project and get credits for Green Procurement sustainability protocols (e.g. LEED V4)!
Download EPDDiscover how to easy assemble and disassemble
the WC flush cistern Tropea S
It is made entirely of technopolymer and pre-fitted in the cisterns to make installation easier and faster; the system also incorporates an accessible closing device to always guarantee perfect performance.
Designed and produced to guarantee maximum reliability in all situations, it resists water hammer as great as 30 bar. The internal accessible filter and the absence of a hose allow an easy maintenance and guarantee an excellent level of silence. It is certified in accordance with EN 14124.
The resistance to limescale of its components, the self-regulation to the WC pans present on the market, and the blends of the seals that resist to the corrosion effect over the years, make it the most reliable valve on the market.
The device guarantees the perfect position and protection of the internal components during handling of the cistern until the control plate is installed.
Regardless the installation type, Tropea S is the ideal solution. The wide range of frames, the available accessories and the technical solutions adopted
inside the cistern guarantee flexibility, speed and adaptability to all types of walls and installation requirements.
Designed for installation in walls of reduced thickness made of brick or wood with a floor standing WC pan.
Incorporates a galvanized sheet frame to be used with wall-hung pans in masonry rolls with reduced thickness.
Is equipped with a painted steel frame designed for installation in light walls (plasterboard, wood) with a wall-hung pan.
This is the most flexible frame of the entire range. Made of painted steel, it is designed for installations in plasterboard walls or mixed walls with a wallhung WC pan.
The Valsir range of flush cisterns meets the aesthetic requirements of the market thanks to the design and the refined materials of the control plates.
The Valsir Design line of control plates is part of a project launched by Valsir destined for the showroom distribution channel and encompasses over 250 models produced using innovative and refined materials.
The range of in-wall and external cisterns is accompanied by a complete series of pneumatic push buttons.
Tropea S can be used in less common applications by using the optional components such as the remote pneumatic dual button for disability,
friendly bathrooms, the tamper-proof push button for installations in stadiums and prisons, or push buttons to facilitate the visually impaired.
Easy to use push buttons were designed for disability friendly bathrooms.
They were designed to make access to the buttons more practical thus ensuring water savings.
The tamper-proof push buttons make it easy to satisfy the installation requirements that are typical of public places, hotels, stadiums or prisons.
As of 1st September 2012 the CE marking is required on all in-wall and external flush cisterns and it is an important instrument that defines the level of quality and reliability of the product. The CE mark states the parameters of product performance: durability, level of noise and volume of water discharged are some of the fundamental parameters.
Tropea S not only has obtained the CE mark but It also has characteristics that meet the Green Building principles.
Tropea S is available with the Ariapur odour extractor system which performs a dual extraction to ensure the perfect supply of fresh air to the bathroom.
Regardless the installation type, Tropea S is the ideal solution. The wide range of frames, the available accessories and the technical solutions adopted inside the cistern guarantee flexibility, speed and adaptability to all types of walls and installation requirements.
It is designed for installation in walls of reduced thickness made of brick or wood with floor standing WC pan. The flush pipe allows an adjustment of 20 mm upwards or downwards to correct any misjudgements of height once the floor has been completed.
All the materials necessary for installation are included in the packaging and it is available with the Valsir Ariapur odour extractor system.
Suitable for the installation of wall-hung pans in masonry walls, the Fixsystem frame incorporates an extended compact WC bend to allow installation in 90 mm walls.
The frame and all the anchor points are made entirely of galvanized steel to guarantee maximum corrosion resistance
Tropea S Fixsystem S86 is available with the Valsir Ariapur odour extractor fan.
It incorporates a painted steel frame that is ideal for installations in light or mixed walls (plasterboard, wood) with wall-hung pans.
The reduced depth (90 mm) and the compact WC bend allow installations in all wall types.
The painted surface gives the frame greater corrosion resistance over time. Tropea S Block is available with the Valsir Ariapur odour extractor system.
Made of painted steel, it is designed for installations in light or mixed walls (plasterboard, wall) with a wall-hung pan. Thanks to the peculiar structure of the legs that are anchored to the floor, the frame does not require any other anchor points to the wall structure.
The painted surface gives the frame greater corrosion resistance over time.