Not registered?
If you have not yet registered on the Valsir web site fill in the form with your details and obtain free access to the download area where you will be free to download our price lists and technical brochures. You will also have the possibility of receiving our periodic newsletter: the best way to remain up-to-date on all the latest developments in Valsir.
Valsir is the only company that can supply a triple layer waste system with a Triplus® “ventilation branch”. This is the ideal solution in high-rise buildings with a high simultaneous use factor of the sanitary appliances.
This innovative waste system guarantees excellent ventilation of the stack and branch connections on each floor thus limiting pressure fluctuations within the system.
This system also allows significant advantages in terms of cost savings thanks to the possibility of creating one soil stack (therefore no separate ventilation pipes are required) with one 110 mm diameter with over double the discharge capacities of primary ventilation systems.
One soil stack, no separate ventilation pipes required.
in comparison with conventional systems.
of effluents.
of the stack and branches of each floor.
allacciate alla stessa braga.
on connected to the same soil stack.
* The side connections on the Triplus® ventilation branch are made in the factory according to project specifications.
The number of bathrooms depends on their composition
Drainage capacity 40% greater than systems with primary ventilation.
Drainage capacity 120% greater than systems with primary ventilation.
Triplus® ensures practical and rapid installations without the use of glues, electrical appliances or special tools, thanks to the push-fit jointing system.
The special geometry of the seal and the push-fit socket guarantee total water tightness and allow the normal movements of the pipeline including those caused by thermal expansion.
In order to make use of pipe cut offs that would otherwise be discarded, Valsir supplies the bi-joint sleeve. This is a special fitting that allows plain ended pipes to be connected guaranteeing water tightness without penalising waste flow rates.
The range is composed of pipe lengths between 150 mm and 3 m and is characterised by a wide choice of fittings and accessories that allows the construction of the most varied system configurations.
The smaller diameters such as 32, 40 and 50 mm are used for the branch pipe connections on each floor, while the larger diameters such as 250 mm are used for the waste manifolds.
The range is completed with accessories for the connection to other Valsir waste systems and pipe clips, which, when fitted with anti-vibration rubber, allow reduction of the vibrations that are transferred to the installation walls when the waste system is in use.
Wide range of diameters from DN 32 mm to DN 250 mm.
Surface mounting of pipes requires the use of suitable brackets that must withstand the weight of the pipe, the weight of the waste water and the forces that are generated by expansion and contraction. In relation to the type of bracketing chosen, the so-called guide points and fixed points (or anchor points of the pipeline) must be provided.
In all cases, if the waste system is required to reduce noise then sound reducing brackets with anti-vibration rubber must be used.
If the waste system is constructed using Triplus® or Silere® then the employment of sound insulating pipe brackets is essential
Valsir is the only company that can supply a triple layer waste system with a Triplus® “ventilation branch”. This is the ideal solution in high-rise buildings with a high simultaneous use factor of the sanitary appliances.
This innovative waste system guarantees excellent ventilation of the stack and branch connections on each floor thus limiting pressure fluctuations within the system.
When a waste system is in use, noises are generated inside the pipelines causing it to vibrate from the fall of the liquid being discharged
Most of the noise generated spreads inside the pipe but the vibrations that are generated are transmitted from the walls of the pipe to the surrounding area and to the bracketing systems and consequently to the building structure.
To minimize noise levels in waste and drainage systems, not only should the system be properly designed and the waste circuit be mounted correctly, but it is also important to choose a system with an elevated soundproofing performance.
Triplus® allows waste systems to be installed that guarantee excellent soundproofing performance, with 2 l/s (typical toilet flush) noise emissions of 12 dB(A) were measured.
The reference standards used to evaluate the performance of waste systems in the laboratory and which specify the measurement methods are German Standard DIN 4109 (together with DIN 52219) and European Standard EN 14366. Both standards require the use of a four-storey building with an inside wall in concrete to which the waste stack is anchored.
The measurement floors are divided into two rooms: the front room is where the waste stack is installed, the rear room has no pipes running through it but receives the sound vibrations in the partition wall. The values measured can be expressed with different indicators depending on requirements and the reference standards.
LSC,A is the indicator required by EN 14366 and indicates the structural-borne noise level transmitted whereas LIN is an indicator that also takes air-borne noise into consideration required by DIN 4109.
It doesn’t matter which indicator is more important, the aspect that needs to be taken into consideration is that in order to compare different waste systems the same indicator must be used.
The actual noise levels of a waste system can only be measured on site, in that noise emissions depend on numerous factors, such as the installation and the type of building; laboratory indicators are only to be used as a means of comparison.
The Triplus® pipes are in fact made up of three layers of material, which, when joined, result in a system with extremely good mechanical characteristics, even at low temperatures, and an excellent soundproofing performance.
Triplus® is a push-fit system that includes triple layer pipes, fittings and accessories, industrialized, produced and patented by Valsir, that guarantees the levels of low noise emissions of waste systems required by the regulations, laws and standards in force.
The intermediate layer is created with a patented polypropylene-based (PP) mix with mineral fillers (MF) such as to provide the Triplus® system with excellent mechanical characteristics at low (impact resistance at temperatures as low as -25°C) and high temperatures (continuous discharge with temperatures as high as 95°C).
The Triplus® waste system can transport waste waters with PH values between 2 and 12, it has a high resistance to the most common chemical compounds and is characterised by an extremely smooth internal surface that prevents the build-up of internal deposits inside the waste network.
The socket connection, does not require the use of glues or harmful solvents.
Measured in the Fraunhofer laboratories in Stuttgart, in compliance with European Standard EN 14366 equal to 12 dB(A) with a flow rate of 2 l/s (certificate P-BA 227/2006).
To substances dissolved in civil and industrial waste waters.
High impact resistance at extremely harsh temperatures (as low as -25°C).
The pipes are made up of three layers of material joined together to guarantee elevated mechanical resistance.
Wide range of diameters from DN 32 mm to DN 250 mm.
Triplus is completely recyclable and designed according to the principles of Green Building. Just like our HDPE, Triplus is the only drainage system in the world to be awarded the VERY GOOD rating (double tick) by the prestigious Green Building Council of Singapore.
This certification highlights the very high level of sustainability of Triplus production process; thanks to an extremely careful management of energy, raw materials, water, and waste within a plant that is also certified to ISO 9001, 14001 and 50001 standards, Triplus is one of the most sustainable drainage systems on the market.
The EPD statement is also available to certify the reduced environmental impact associated with Triplus according to the full life cycle assessment, or "cradle to grave". This means that our monitoring and optimisation efforts do not only cover the production stages: Triplus is a champion of sustainability from the extraction of its raw materials to the disposal of the product itself. Choose it for your project and get credits for Green Procurement sustainability protocols (e.g. LEED V4)!
The range is composed of pipe lengths between 150 mm and 3 m and is characterised by a wide choice of fittings and accessories that allows the construction of the most varied system configurations.
The smaller diameters such as 32, 40 and 50 mm are used for the branch pipe connections on each floor, while the larger diameters such as 250 mm are used for the waste manifolds.
When a waste system is in use, noises are generated inside the pipelines causing it to vibrate from the fall of the liquid being discharged.
Most of the noise generated spreads inside the pipe but the vibrations that are generated are transmitted from the walls of the pipe to the surrounding area and to the bracketing systems and consequently to the building structure.
Valsir has developed a new product capable of significantly improving waste systems:
Thanks to its experience gained worldwide, Valsir has developed T-TRAP: a trapped gully that allows the installation of waste systems in the suspended ceiling of the room below. This product provides greater accessibility to the waste system and faster modifications in the event of renovations.
T-TRAP has the best product characteristics on the market:
Valsir is the only company that can supply a triple layer waste system with a Triplus® “ventilation branch”. This is the ideal solution in high-rise buildings with a high simultaneous use factor of the sanitary appliances.
Triplus® ensures practical and rapid installations without the use of glues, electrical appliances or special tools, thanks to the push-fit jointing system
The innovative Triplus system installed in great buildings all over the world.
The range has been certified by the strictest certification bodes.
Valsir S.p.A.
Località Merlaro, 2
25078 Vestone (BS - Italy)
Tel. +39 0365 877 397
Fax +39 0365 81 268
valsir@valsir.it
